Brunswick News
Service Bulletin 10-1
We have received reports that if the Power Cord is not retrieved properly during reverse travel of the lane machine, the Power Cord could get caught under the machine and be damaged by the Distance Encoder
Sprocket.
A Sprocket Shield Kit is being provided to every A22 customer to reduce the possibility of this damage. The kit contains a pair of shields, 4 plastic rivets and instructions for modifying the Distance Encoder
Sprocket. Please be aware that it is still important for the lane machine operator to guide the power cord while the machine is in the reverse direction.
IMPORTANT!: This shield is specifically designed to prevent interaction between the Distance Encoder Sprocket and the power cord. It is extremely important that this shield be installed as soon as possible.
Please install this shield using the Installation Instructions, 14-900215-000, included with the kit. A copy of these instructions is included with this Service Bulletin for your information. During the installation of this kit, it is important that the power cord be inspected for possible damage. Use the list of original equipment replacement parts to replace any items in need of repair or replacement.
- 14-860208-115 – 115 volt power cord assembly
- 14-860208-230 – 230 volt power cord assembly
- 11-617076-001 – Braided sleeving – 54-1/2” long (138.4 cm)
- 11-617077-002 – Heat shrink tubing for 40” (1.106 cm) length inside the braided sleeve
- 11-617079-000 – Heat shrink tubing for 6” (15.2 cm) length to secure the outside of both ends of the braided sleeving
- 14-860225-000 – Sprocket Shield Kit
If you have questions regarding the information contained in this Service Bulletin, please contact Brunswick Technical Support at 1-800-937-2695 or 231-725-4966, FAX 231-725-4667, or Email techsupport@brunbowl.com.
